Over Crank Shearing Machine

The Over Crank Shearing Machine offers precise and efficient sheet metal cutting with a durable over-crank drive mechanism. It delivers smooth operation, excellent cutting accuracy, and reliable performance. Suitable for a wide range of industrial shearing applications.

Description

RT Power Press Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and repeatability.

Frame
Rigid steel frame of Shubham Shears are optimally designed to avoid weak sections at load supports and is of interlocked design. The ram is guided throughout its length by accurate machined guide ways ensuring proper clearance and clean cut.

Hold – Down System
Spring loaded mechanical hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request.

Knives
RT Shears are provided with high quality single segment (HcHcr) Knives for longer tool life. Ease in assembling of knife reduces down-time. The knife blades are four edged.

Lubrication
All bearing parts and guide surfaces are lubricated through hand-operated lubrication system.

Mechanical Back Guage
This is a standard equipment provided on all Shubham Shears. Scale on the back guage gives instantaneous reading of distance between shear and back guage. Thus avoiding errors and maintenance encountered in electronic equipment.

Finger Guard
Fitted in front of hold-down for operator protection without obstructing viewing.

Standard Features

  • Foot Pedal.
  • Fly Wheel & Gear Guard.
  • Self Lubrication System
  • Motor Pully
  • A Pair of Four Edge Sher Blade
  • Standard Front Gauge
  • Back Gauge (Manual Operated)

Options

  • Motorised Back Gauge.
  • Automatic Lubrication System.
  • Vee-Belts.
  • Electric Motor & Starter / Control Panal Board.
  • Squaring Gauge System.
  • Stroke Counter.
  • Extension Squaring Arm.
  • Hydraulic Holddown Pads (Cam-Pump).
  • All Dimensions are in mm.
  • Power Supply 400/440 volts, 3 Phase, 50 Cycle.
  • As day to day improvements are contemplated for better performance of the machine. We reserve the rights to alter the specifications without prior notice.
  • All the machines undergo a through check-up by our expert engineers before dispatch to ensure their smooth and trouble free operation.
Model Cutting Cap.
In M.S.
(Length × Thick)
Depth of Throat Standard
Front Gauge
Standard
Rear Gauge
Table
(Height/Width)
Blade
(L × W × T)
Stroke
Per Minute
Hold Down
to Knife Edge
Machine
(L × W × H)
Main motor
HP / KW
Approx.
Weight Kgs.
ROC612 1270 × 6 80 600 750 770/450 1270 × 75 × 18 30 45 2250 × 1950 × 2300 7.5/5.6 4500
ROC615 1525 × 6 80 600 750 770/450 1525 × 75 × 18 30 45 2500 × 1950 × 2300 10/7.7 5100
ROC620 2030 × 6 80 600 750 770/450 2030 × 75 × 18 30 45 3000 × 1950 × 2300 10/7.7 6300
ROC625 2540 × 6 80 600 750 770/450 2540 × 75 × 18 30 50 3550 × 1950 × 2300 12/9.7 7200
ROC631 3125 × 6 80 600 750 770/450 3125 × 75 × 18 30 50 4150 × 1950 × 2400 15/11.2 9800
ROC815 1525 × 8 80 600 750 770/450 1525 × 75 × 18 30 50 2570 × 1950 × 2300 12.5/9.7 6500
ROC820 2030 × 8 80 600 750 800/450 2030 × 75 × 18 25 50 3150 × 1950 × 2500 12.5/9.7 7000
ROC825 2540 × 8 80 600 750 800/450 2540 × 75 × 18 25 50 3670 × 1950 × 2500 15/11.2 8000
ROC831 3125 × 8 80 600 750 800/450 3125 × 90 × 18 25 50 4250 × 1950 × 2600 20/15 11500
ROC1020 2030 × 10 80 600 750 800/450 2030 × 90 × 18 25 75 3200 × 1950 × 2600 15/11.2 7800
ROC1025 2540 × 10 80 600 750 800/450 2540 × 100 × 22 25 75 3700 × 1950 × 2600 20/15 9100
ROC1031 3125 × 10 80 600 750 800/450 3125 × 100 × 22 25 75 4300 × 1950 × 2600 25/18.7 9600
ROC1320 2030 × 13 80 600 750 800/450 2030 × 100 × 22 25 75 3250 × 1950 × 2600 20/15 9250
ROC1325 2540 × 13 80 600 750 800/450 2540 × 100 × 22 25 75 3750 × 1950 × 2600 25/18.7 10500
ROC1331 3125 × 13 80 600 750 800/450 3125 × 100 × 22 25 75 4350 × 1950 × 2600 30/22.5 13000